OSCAR G2
Manual
D01-44en201810
Software V.1.1.6
(C)TriOS Mess- und Datentechnik GmbH
Bürgermeister-Brötje-Str. 25
D- 26180 Rastede/Germany
34 / 62
It is mandatory to enter the values for salinity and temperature before each measurement,
when you now press the
“measure now” button or the button of the spectrum type you want
to record, the values of salinity and temperature are saved and written into spectrum
attributes.
In case of any temperature or salinity change the new values always have to be entered
manually.
With the button
“measure now” the spectrum type, that is set chosen under “settings” (see
Fig. 18), will be recorded.
Examples of a transmission and a calibrated spectrum are pictured in Fig. 16 and Fig. 17.
With the button “more” further information is visible, like listed below.
Fig. 15. Web interface: Measurement sub-item Spectrum, further information
Please note:
The values above are just examples, they might be different in your
application!
