TTrig
1
TriOS Mess- und Datentechnik GmbH · Bürgermeister-Brötje-Str. 25 · D-26180 Rastede · Germany
Phone: +49 (0) 4402 69670 - 0 · Fax: +49 (0) 4402 69670 - 20 · info@trios.de · www.trios.de
D04-05Aen201908 Quick Guide TTrig
TTrig
12C100000
TTrig is a measurement interval switch for the TriOS G2 sensors OPUS and NICO. Due to its low standby power
(<1 mW), it is ideally suited for operation with a battery as power supply. It is designed to minimize energy consumption between
measurements.
The TTrig features an additional connection for commissioning and controlling a wiper (W55).
Remote or self-sufficient measuring stations can thus be operated maintenance-free for several months.
An RJ-45 Ethernet interface provides access to the sensor's G2 web interface for downloading the measurement data from the
data logger with a notebook.
Technical Specifications
POWER SUPPLY
Voltage supply
12...24 VDC, max. 4A
Power in standby
<1mW
SENSOR INTERFACES
Connection
M12 for TriOS G2 sensors; 1x RJ-45
Standard
RS-485
Protocol
Modbus RTU
Analog interfaces
No
OTHER INTERFACES
Connection
1x M8 connector for wiper W55
Trigger output
ENVIRONMENT
Operating temperature
0...+40 °C
Storage temperature
-10...+70 °C
Relative air humidity
0...95 % (non-condensing)
Protection type
IP64
MECHANICAL SYSTEM
Dimensions (width x height x
depth)
140 x 80 x 60 mm
Weight
0.5 kg
