12-4
CLASS C MOTORHOME
12.1.4
WATER PUMP FILTER
Before water can enter the various outlets in your
motorhome it has to flow through a water filter. This
filter is located between the fresh water tank and
the water pump.
Check the water filter periodically and clean or
replace it at least annually to assure a clean supply
of water.
12.1.5
WATER SYSTEM DRAINS
The water system is designed with drain lines and
valves for draining the system. Open both valves
to completely drain the system, close the valves
before refilling the system.
Fig. 12-5 DRAIN VALVES
12.1.6
WATER PUMP INITIAL START-UP
1.
Make sure all drain valves are closed including
the water heater valve.
2.
Turn water pump switch off.
3.
Fill water tank.
4.
Open faucets, both hot and cold.
5.
Turn pump switch.
6.
Close each faucet (cold and hot) as soon as
water flows steadily.
7.
Check to see that pump stops after all faucets
are closed.
8.
Pump is now ready for automatic operation. It
will start whenever a faucet is opened.
