If the synchroniza3on process fails in seYng the configura3on of all the detectors
•
Disconnect the unit from the main power supply, wait approximately 30 seconds
and reconnect the unit.
•
Press the TEST buYon in each detector for 15 seconds.
•
Disconnect the unit from the main power supply, wait approximately 30 seconds
and reconnect the unit.
•
Remove the baYery from the Shut-‐off unit.
•
Wait 30 seconds.
•
Reinstall the baYery in the Shut-‐off unit.
•
Restart the synchroniza3on process.
Synchroniza3on reset (Reset HEAD)