1. ALWAYS turn the function switch to the OFF position
when the meter is not in use.
2. If “OL” appears in the display during a
measurement, the value exceeds the range you
have selected. Change to a higher range.
AC/DC Voltage Measurements
1. Set the Rotary Switch to the
position.
2. Press the
MODE
button to select AC or DC Voltage. The
AC or DC Symbol will appear on the LCD display.
3. Insert the black test lead into the
COM
jack and the red
test lead into the
V
input jack.
4. Touch the test leads to the circuit under test. If measuring
DC voltage, touch the red test lead to the positive side of
the circuit and the black test lead to the negative side of
the circuit.
5. Read the voltage on the LCD display.
WARNING
: Risk of electrocution. High-voltage
circuits, both AC and DC, are very dangerous and
should be measured with great care.
www.
.com
information@itm.com
1.800.561.8187