background image

6

Product Specifications

Cables Tested:

HDMI cables with Type A connectors

conforming to 1.0, 1.1, 1.2, 1.2a, 1.3,

1.3a, 1.3b, 1.3c, 1.4, 1.4a  Category 1 

 and Category 2 cables

Tests Performed:

Tests for Opens, Shorts, Miswires

Test Modes:

Auto or Manual

Displays

Transmitter:

9 Red LEDs indicate test performed

Receiver:

8 Green LEDs, 1 Red / Green LED,

 indicates test results

Battery:

Standard 9v Alkaline Battery,

ANSI 1604A, IEC 6LR61

Size (approx):

Transmitter: 2.8" x 4.8" x 1.1"

Receiver: 2.3" x 1.2" x 1.1"

Combined: 2.8" x 5.9" x 1.1"

Weight (approx):

Transmitter: 0.305 lb

Receiver: 0.050 lb

Combined: 0.355 lb

Maintenance

No regular maintenance of the WireMaster HDMI is required. In

the event the product is defective or is damaged, please contact

Triplett for repair information.

 TRIPLETT PRODUCT RETURN INSTRUCTIONS

  In the unlikely event that you must return your Triplett

  equipment for repair, the following steps must be taken.

  1)  Call 1-800-TRIPLETT to obtain a Return Material

       Authorization (RMA) number from Customer Service.

  2)  Enclose a copy of the original sales receipt showing date

       of purchase.

  3)  Clearly print the RMA number on the outside of the

       shipping container.

  4)  Return to:

Triplett

850 Perimeter Road

Manchester, NH  03103

ATTN: Repair Dept.

Summary of Contents for WireMaster HDMI2









Reviews: