2-2
2-3
2-4
A
5
2-2
Connect the input plug to your facility’s
compatible AC power source.
2-3
Connect your equipment’s input plugs
to the appropriate outlets on the PDU.
Note: It is recommended that you do not
connect a live load to the PDU. If the load
you intend to connect has an ON/OFF
switch, please turn the switch to OFF prior to
connection.
2-4
Option 1 - Wire Retention Shelf
Procedure (for PDU3MV6L2120,
PDU3MV6L2120LV, PDU3MV6L2120B,
PDU3MV6L2130, PDU3MV6H50,
PDU3MV6H50A, PDU3XMV6G20 and
PDU3XMV6L2220 models):
If you
attached the cord retention bracket(s),
tie each equipment power cord to the
retention bracket. Attach each cord to the
retention shelf by looping the cord and
securing it with one of the included cable
ties
A
. Make sure each cord can be
unplugged from the PDU without removing
the cable tie.
Option 2 - Cord Retention Procedure
(for PDU3MV6L2130A):
Use the
included C14 and C20 plastic sleeves to
secure plugs to receptacles. Attach the
sleeve to the plug, making sure that the
pull tabs
B
remain outside the plug and
that the fit is secure. To unplug equipment
properly, use the pull tabs to remove the
plug and sleeve from the receptacle.
Installation
Some Models
Will Vary.
2-4
B
18-08-424-933145.indb 5
2/7/2019 2:00:11 PM
