9
Battery Replacement
Under normal conditions, the original battery in your UPS will last several years. Battery replacement should only be performed
by qualified personnel. Refer to “Battery Warnings” in the Safety section for complete battery safety information.
Your UPS requires
two Tripp Lite RBC51
replacement battery cartridges. For further information about replacement compatibility
and ordering, visit Tripp Lite on the Web at www.tripplite.com/support/battery/index.cfm.
To Replace the Batteries:
1. Remove screw at the bottom of the unit’s front panel.
2. Carefully pull the front panel away from the UPS.
3. Remove the battery support bar.
4. Carefully pull the old batteries from the UPS and
disconnect them.
5. Connect the new batteries in exactly the same manner
as the old ones: positive (red) connectors together and
negative (black) connectors together. Carefully push the
batteries back into the UPS.
6. Reinstall the battery support bar and replace the front
panel.
15-02-071-9332B0.indb 9
2/18/2015 10:17:58 AM
