background image

12

Regulatory Compliance Identification Numbers

For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has been assigned a unique 

series number. The series number can be found on the product nameplate label, along with all required approval markings and 
information. When requesting compliance information for this product, always refer to the series number. The series number 
should not be confused with the marking name or model number of the product.

WEEE Compliance Information for Tripp Lite Customers and Recyclers  

(European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new 
electrical and electronic equipment from Tripp Lite they are entitled to:

• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)
• Send the new equipment back for recycling when this ultimately becomes waste

Tripp Lite has a policy of continuous improvement. Product specifications are subject to change without notice.

Compliance

Note on Labeling

Two symbols are used on the label.

V~ : AC Voltage

V  :  DC  Voltage 

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

20-02-313  93-3C6A_RevA

Summary of Contents for AG-04F3













Reviews: