background image

3

Important Safety Instructions 

Battery Warnings

•  Batteries can present a risk of electrical shock and burn from high short-circuit current. Observe proper precautions. Do not 

dispose of the batteries in a fire. Do not open the UPS or batteries. Do not short or bridge the battery terminals with any 
object. Unplug and turn off the UPS before performing battery replacement. Use tools with insulated handles. There are no 
user-serviceable parts inside the UPS. Battery replacement should be performed only by authorised service personnel using 
the same number and type of batteries (Sealed Lead-Acid). 

 

The batteries are recyclable. Refer to your local codes for disposal requirements or visit tripplite.com/support/recycling-
program for recycling information. Tripp Lite offers a complete line of UPS System Replacement Battery Cartridges (R.B.C.). 
Visit Tripp Lite on the Web at tripplite.com/products/battery-finder/ to locate the specific replacement battery for your UPS.

  CAUTION: A battery can present a risk of electrical shock and high short-circuit current. Contact with any 

part of a grounded battery can result in electrical shock. The following precautions should be observed when 

working on batteries:

•  Remove watches, rings or other metal objects.
•  Use tools with insulated handles.
•  Wear rubber gloves and boots.
•  Do not lay tools or metal parts on top of batteries.
•  Disconnect the charging source and load prior to installing or maintaining the battery.
•  Remove battery grounds during installation and maintenance to reduce likelihood of shock.
•  Remove the connection from ground if any part of the battery is determined to be grounded.
• Unplug the UPS from the AC mains receptacle. Disconnect all cables, including the equipment plugged into the UPS.
• Servicing of batteries should be performed or supervised by personnel knowledgeable about batteries and required 

precautions.

• When replacing batteries, replace with the same type and number of batteries or battery packs.
• CAUTION: Do not dispose of batteries in a fire. The batteries may explode.
• CAUTION: Do not open or mutilate batteries. Released electrolyte is harmful to the skin and eyes. It may be toxic.

UPS and Battery Recycling

Tripp Lite products use sealed lead-acid batteries, which are highly recyclable. 
Call Tripp Lite at 1.773.869.1234 or visit tripplite.com/support/recycling-program for more information on recycling the 
batteries or any other Tripp Lite product. Please refer to local codes for disposal requirements.   

Summary of Contents for AG-04F3













Reviews: