background image

50

Filtering  

(continued)

MAC Filtering

AP Operation

IP Filtering

To add an IP Filter:

1. Check the IP Filter Enable check box

2. Click Add. A dialog box similar to the one below appears:

To add a MAC Filter:

1. Click Add. A dialog box similar to the one below appears:

3. Type the IP address (or the first IP address in a range of IP 

addresses) you wish to filter in the dialog box and click OK. A 
second dialog box, similar to the one below, appears:

4. To filter a single IP address, key in the same address as the start IP. 

To filter a range of addresses, key in the last IP address in the range 
you wish to filter.

5. After filling in the address, click OK.

6. Repeat these steps for any additional IP addresses you want to filter.

To delete an IP Filter:

Select the desired IP Filter from the list and click Remove.

To modify an IP Filter:

1. Select the desired IP Filter from the list and click Edit. An Edit 

dialog box similar to the Add dialog box will appear.

2. Delete the old start IP address and replace it with the new one. 

Click OK.

3. Delete the old end IP address and replace it with the new one. Click 

OK.

Note: To block a computer from accessing the B051-000, you do not 
need to filter both its IP address and its MAC address. Any computer 
blocked by an IP Filter will be denied access to the B051-000, even 
if the computer is allowed to access the B051-000 under the MAC 
Filters that are set up.

2. Type in the desired MAC address and click OK.

3. Repeat these steps for any additional MAC addresses you want to 

filter.

To delete a MAC Filter:

Select the desired MAC Filter from the list and click Remove.

To modify a MAC Filter:

•  Select the desired MAC Filter from the list and click 

Edit. An Edit 

dialog box similar to the Add dialog box appears.

•  Delete the old address and replace it with the new one. Click 

OK.

Note: To block a computer from accessing the B051-000, you do not 
need to filter both its IP address and its MAC address. Any computer 
blocked by a MAC Filter will be denied access to the B051-000, even 
if the computer is allowed to access the B051-000 under the IP filters 
that are set up.

Summary of Contents for B051-000


































































Reviews: