background image

65

Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You’ll be automatically entered into a drawing 

for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details. 

WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, when customers buy new electrical and 
electronic equipment from Tripp Lite they are entitled to:

•  Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the country)

•  Send the new equipment back for recycling when this ultimately becomes waste

FCC Part 68 Notice (United States Only)

If your Modem/Fax Protection causes harm to the telephone network, the telephone company may temporarily discontinue your service. If 

possible, they will notify you in advance. If advance notice isn’t practical, you will be notified as soon as possible. You will be advised of 
your right to file a complaint with the FCC. Your telephone company may make changes in its facilities, equipment, operations or procedures 

that could affect the proper operation of your equipment. If it does, you will be given advance notice to give you an opportunity to maintain 
uninterrupted service. If you experience trouble with this equipment’s Modem/Fax Protection, please call Tripp Lite Technical Support at (773) 
869-1234 for repair/warranty information. The telephone company may ask you to disconnect this equipment from the network until the problem 
has been corrected or you are sure the equipment is not malfunctioning. There are no repairs that can be made by the customer to the Modem/

Fax Protection. This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state 

tariffs. (Contact your state public utility commission or corporation commission for information.)

Tripp Lite follows a policy of continuous improvement. Product specifications are subject to change without notice.

Made in China.

Appendix

WARRANTY REGISTRATION

Tripp Lite World Headquarters

1111 W. 35th Street, Chicago, IL 60609 USA

(773) 869-1234 • 

www.tripplite.com

200810213 93-2850

Summary of Contents for B051-000


































































Reviews: