background image

19

Warranty & Warranty Registration

1-Year Limited Warranty

TRIPP  LITE  warrants  its  products  to  be  free  from  defects  in  materials  and  workmanship  for  a 

period of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty 
is  limited  to  repairing  or  replacing  (at  its  sole  option)  any  such  defective  products.  To  obtain 
service  under  this  warranty,  you  must  obtain  a  Returned  Material  Authorization  (RMA)  number 

from TRIPP LITE or an authorized TRIPP LITE service center. Products must be returned to TRIPP 

LITE  or  an  authorized  TRIPP  LITE  service  center  with  transportation  charges  prepaid  and  must 

be accompanied by a brief description of the problem encountered and proof of date and place 

of purchase. This warranty does not apply to equipment which has been damaged by accident, 
negligence or misapplication or has been altered or modified in any way.
EXCEPT  AS  PROVIDED  HEREIN,  TRIPP  LITE  MAKES  NO  WARRANTIES,  EXPRESS  OR  IMPLIED, 
INCLUDING  WARRANTIES  OF  MERCHANTABILITY  AND  FITNESS  FOR  A  PARTICULAR  PURPOSE. 

Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid 
limitation(s) or exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, 

SPECIAL,  INCIDENTAL  OR  CONSEQUENTIAL  DAMAGES  ARISING  OUT  OF  THE  USE  OF  THIS 
PRODUCT,  EVEN  IF  ADVISED  OF  THE  POSSIBILITY  OF  SUCH  DAMAGE.  Specifically,  TRIPP  LITE 

is  not  liable  for  any  costs,  such  as  lost  profits  or  revenue,  loss  of  equipment,  loss  of  use  of 
equipment, loss of software, loss of data, costs of substitutes, claims by third parties, or otherwise.

WARRANTY REGISTRATION

Visit  www.tripplite.com/warranty  today  to  register  the  warranty  for  your  new  Tripp  Lite  product. 

You’ll be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details. 

WEEE Compliance Information for Tripp Lite Customers and Recyclers 

(European Union)

Under  the  Waste  Electrical  and  Electronic  Equipment  (WEEE)  Directive  and 

implementing regulations, when customers buy new electrical and electronic 

equipment from Tripp Lite they are entitled to:
•  Send old equipment for recycling on a one-for-one, like-for-like basis (this varies 

depending on the country)

•  Send the new equipment back for recycling when this ultimately becomes waste

13-08-043 93-32D0.indd   19

8/28/2013   2:17:42 PM

Summary of Contents for B126-2A0





















Reviews: