8
4
Connect the external power supply to the transmitter unit and plug the
transmitter unit into a Tripp Lite Surge Suppressor, Power Distribution
Unit (PDU), or Uninterruptible Power Supply (UPS). The green RJ45 LED
illuminates to indicate that the unit is receiving power from the external
power supply.
5
Using Cat5e/6 cable, connect the RJ45 port on the transmitter unit
marked
OUTPUT
to the RJ45 port on the B126-110 repeater unit
marked
INPUT
.
6
Connect a monitor to the HDMI
OUTPUT
port on the repeater unit
using a Tripp Lite P568-Series High-Speed HDMI Cable.
7
Connect the external power supply to the repeater unit and plug the
repeater unit into a Tripp Lite Surge Suppressor, Power Distribution
Unit (PDU), or Uninterruptible Power Supply (UPS). The green power
and the green RJ45 LEDs will illuminate to indicate that the unit is
receiving power from the external power supply.
Up to 4 units can be daisy-chained (3 repeaters and 1 active receiver). To
add additional repeater units, proceed to step 8. To finish your installation
with the B126-2A1 receiver unit, proceed to step 11.
8
Using Cat5e/6 cable, connect the RJ45 port on the repeater unit marked
OUTPUT
to the RJ45 port on a second repeater unit marked
INPUT
.
9
Connect a monitor to the HDMI
OUTPUT
port on the repeater unit
using a Tripp Lite P568-Series High-Speed HDMI Cable.
10
Connect the external power supply to the repeater unit and plug the
repeater unit into a Tripp Lite Surge Suppressor, Power Distribution
Unit (PDU), or Uninterruptible Power Supply (UPS). The green power
and the green RJ45 LEDs will illuminate to indicate that the unit is
receiving power from the external power supply.
1 x 2 Extender Kit with
Remote/Repeater Installation
13-08-043 93-32D0.indd 8
8/28/2013 2:17:39 PM
