4
Disclaimer
Before installation, check the following settings of your source(s)
and TV/monitor(s):
1. Set to display 60 Hz. Double-check factory settings, in case the default
is set to a lower frequency (Hz) than advertised.
2. Ensure the input setting of your monitor is set at HDMI 2.0. Some
displays may have default setting at HDMI 1.4
Note:
This is only important for the B127A-1A1-BDBH model; the B127A-1A1-
BDBD will need DP 1.2a settings.
3. Verify your monitor has the HDR feature enabled. Some displays
may have this feature disabled as a factory setting.
4. Check if the Ultra HD (UHD) Deep Color setting is enabled on your TV/
monitor. Confirm with your TV/monitor manufacturer which HDMI ports
support UHD Deep Color.
Note:
Only for the B127A-1A1-BDBH model.
5. Check the USB/IR DIP switch, as the default setting is set to "IR".
Note
: To connect a local monitor to your installation, the UHD Deep Color setting
may need to be disabled on your local TV/monitor (depending on the make/
model) to achieve 4K/60 Hz resolution.
20-09-170-Book.indb 4
20-09-170-Book.indb 4
4/6/2021 3:50:06 PM
4/6/2021 3:50:06 PM
