5
Installation
2.
(2-Port Models)
– Connect the included USB
Micro-B cable between the hub and a USB port
on the computer or USB charger. The green Power
LED will illuminate.
3.
(3- and 4-Port Models)
– Connect the included
external power supply to the hub and plug it into
a Tripp Lite Surge Protector, Uninterruptible Power
Supply (UPS) or Power Distribution Unit (PDU). The
green Power LED will illuminate.
4.
Connect a monitor to an available output port on
the hub.
Note:
The maximum distance between the hub and the
connected monitor must not exceed 15 ft. (4.6 m).
5.
Repeat step 4 for each additional monitor you are
connecting.
6.
Turn on the power to the connected monitors, then
power on the source. The orange port LEDs will
illuminate to indicate a signal is being received and
video will appear on the connected monitors.
7.
Use your video card’s display settings screen to
adjust how video is displayed on the connected
monitors.
16-02-394-93-35A3-EN.indd 5
3/2/2016 2:39:34 PM
