4
4
ON/OFF Button:
Switch the Operating Mode:
While the UPS is plugged into a live
AC outlet, press the
ON/OFF
button and hold it until the UPS beeps
(about 2 seconds) to toggle between
ON
and
OFF.
• ON Mode:
ENABLES battery backup.
UPS Conditions:
The UPS
charges the battery and supplies power to the outlets while
receiving utility line power. The “
” indicator light will illuminate.
If utility power fails, the UPS provides power from battery.
Cold-Start:
Cold start the UPS to use it as a stand-alone power
source when utility power is not present (if the UPS battery is
charged). To cold start the UPS, press and hold the
ON/OFF
button
until the UPS beeps (about 2 seconds), then release it. The “
”
indicator will illuminate and AC power inverted from stored
battery power will be provided to the outlets.
Basic Operation
This connection is optional. The UPS will function properly without this connection.
USB Communications
Use any USB cable to connect the computer’s USB port
to the USB port of the UPS. Download the PowerAlert
UPS monitoring software program appropriate for the
computer’s operating system from
www.tripplite.com/software/ and install it.
Quick Installation
optional
Buttons
201011083.indb 4
1/6/2011 9:00:13 AM
