background image

35

9. Warranty

Limited Warranty

Seller warrants this product, if used in accordance with all applicable instructions, to be free from 
original defects in material and workmanship for a period of one (1) year from the date of initial 

purchase. If the product should prove defective in material or workmanship within that period, 
Seller will repair or replace the product, in its sole discretion. Service under this Warranty includes 

parts and Tripp Lite service center labor. On-site service plans are available from Tripp Lite through 
authorized service partners (in most areas).  Visit www.tripplite.com/support for details. International 
customers should contact Tripp Lite support at intlservice@tripplite.com.
THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, 
MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES OTHER THAN THE 
WARRANTY EXPRESSLY SET FORTH HEREIN. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE 
LAW, ALL IMPLIED WARRANTIES, INCLUDING ALL WARRANTIES OF MERCHANTABILITY OR FITNESS, 

ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY 
EXPRESSLY EXCLUDES ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some states do not 
allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion 
or limitation of incidental or consequential damages, so the above limitations or exclusions may not 
apply to you. This Warranty gives you specific legal rights, and you may have other rights which vary 

from jurisdiction to jurisdiction.)
Tripp Lite; 1111 W. 35th Street; Chicago IL 60609; USA 
WARNING: The individual user should take care to determine prior to use whether this device is 

suitable, adequate or safe for the use intended. Since individual applications are subject to great 

variation, the manufacturer makes no representation or warranty as to the suitability or fitness of 

these devices for any specific application.

Regulatory Compliance Identification Numbers

For the purpose of regulatory compliance certifications and identification, your Tripp Lite product has 
been assigned a unique series number. The series number can be found on the product nameplate 

label, along with all required approval markings and information. When requesting compliance 

information for this product, always refer to the series number. The series number should not be 

confused with the marketing name or model number of the product.

WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing 

regulations, when customers buy new electrical and electronic equipment from Tripp Lite they 
are entitled to:
•  Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending 

on the country)

•  Send the new equipment back for recycling when this ultimately becomes waste

Tripp Lite has a policy of continuous improvement. Specifications are subject to change without 
notice.

18-05-110-933861-EN.indd   35

7/3/2018   2:58:11 PM

Summary of Contents for BP480V100





































Reviews: