CAT5 SMART KVM EXTENDER
7
Mouse driver settings when replacing a computer
For
Type the letters
Wheel mouse or Intellimouse
IN
2 or 3 button mouse
PS
5-button mouse
EP
Set the mouse mode to
IN
when the computer has an operating system that supports Wheel
mouse functionality: (Windows 98 and Linux*).
Set the mouse setting to
PS
when the computer has an operating system that does not support
Wheel mouse functionality: (Windows 95, NT4, DOS, Linux*, UNIX and Novell).
*Depending on the version.
Set the mouse setting to
EP
when the computer has an operating system that supports Explorer
mouse functionality: (Windows – ME, 2000, and XP).
Replacing a mouse type
After replacing a mouse with a different mouse type (as opposed to a different mouse of the
same type) while the KVM Extender is in use. From the Receiver location:
1. Press and hold the Select button for more than 5 seconds.
2. Release the Select button after your monitor blinks once.
Viewing the settings
At the Receiver or Transmitter location, view the settings and firmware revision in any text
editor.
To view the settings:
1. Before entering to the Settings mode switch the keyboard layout to English.
2. Open any text editor, e.g. Notepad.
3. Press
Shift
, then
F2
to enter the Settings mode.
4. Press
F
. The settings appear in the text editor.
Exiting the Settings mode
To save changes and exit the Settings mode:
Press
Esc
.
For more detailed setup and operating instructions please see the softcopy User Guide on the
supplied CD or on our website
http://www.minicom.com/supportuserguides.htm
201204205 • 933190_EN
