4
1. Separate VESA Plate from Wall Mount
2a. Mount on Wood Stud Wall
3
Find a wood stud
location for mounting
the wall mount
Screw the wall
mount onto
the wall
Drill pilot holes
WARNING
• Make sure that mounting screws are anchored into the center of the studs.
Use of a stud finder is highly recommended.
• Installers are responsible to provide hardware for other types of mounting situations.
• Installers must verify that the supporting surface will safely support the combined
load of the equipment and all attached hardware and components.
1
2
Anchor Bolt
D6 Washer
loosen
remove
Position the Mounting
Template to location
with the
↑
UP pointing
towards the ceiling
Mark the exact location
of the mounting holes
14-03-249-93332F.indb 4
4/14/2014 10:48:29 AM