DC system voltage (VDC)
12
Battery recharge rate (included
batteries)
Less than 20 hours from 10% to 90%
Battery Access
Supports battery replacement via built-in access panel
VOLTAGE REGULATION
Voltage regulation description
Automatic voltage regulation (AVR) maintains line power operation with input voltage as low as 89
Undervoltage correction
Input voltages between 89 and 104 are boosted by 14%
LEDS ALARMS & SWITCHES
LED Indicators
Front panel LCD display
Front panel LCD display
Backlighted LCD screen indicates input voltage, 5-bar battery charge level, overload, AVR, on battery and replace
battery status; LCD screen rotates for rack/tower viewing
Alarms
Audible alarm indicates power-failure, low-battery and overload status; alarm can be disabled using PowerAlert
software
Alarm cancel operation
Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate
low-battery status
Switches
2 Switches control off/on power status and alarm-cancel/self-test operation
SURGE / NOISE SUPPRESSION
UPS AC suppression joule rating
480
UPS AC suppression response time
Instantaneous
UPS Dataline suppression
1 line TEL/DSL (1 in / 1 out); Coax jacks (2 sets)
UPS Dataline suppression details
HD-compatible 2.2GHz coaxial protection
EMI / RFI AC noise suppression
Yes
PHYSICAL
Installation form factors supported
with included accessories
Tower
Primary form factor
Tower
UPS / Power Module dimensions in
primary form factor (height x width x
depth / inches)
12 x 3.5 x 6.5
UPS / Power Module dimensions in
primary form factor (height x width x
depth / cm)
30.5 x 8.9 x 16.5
Installed whole system dimensions
in secondary form factor (height x
width x depth / cm)
8.9 x 30.5 x 16.5
Secondary form factor
Horizontal desktop placement
Installed whole system dimensions
in secondary form factor (height x
width x depth / inches)
3.5 x 12 x 6.5
3 / 5
