9
Power Supply Installation
Notes:
• Power off the unit before removing the power supply.
• Exercise caution when handling power supplies, they may hold a residual charge from the unit following removal.
• The N785-CH75W-AC power supply preinstalled with the chassis comes with one fuse glass tube installed and a second spare fuse
stored in a slot next to the installed one. A third spare fuse is included in each of the N785-CH12 and N785-CH75W-AC packaging
cartons.
1. Unscrew the two screws on the top and bottom of the power supply slot and remove the power supply cover.
2. Using the handle, gently insert the power supply into the slot.
3. Fasten the screws to the chassis.
4.
Optional:
If adding a redundant power supply, unscrew the screws on the second power supply slot and repeat steps
2-3.
