176
6.11.4
PoE Schedule
The function has a global
state
configuration. If the global state configuration is disabled. The
Switch will not perform the schedule function. If the global state is enabled, the Switch will check
every port’s configurations.
If the port’s
check
configuration is NO for a specific day, the Switch will not perform action for
the specific port. If the port’s
check
configuration is YES for a specific day, the Switch will check
the
Start time
and
End Time.
If the current time is in the interval between
Start time
and
End
Time,
the Switch will perform the
action
configuration. If the
action
is ENABLE, the Switch will
send power to the port. If the current time is not in the interval between
Start time
and
End Time,
the Switch will not send power to the port.
6.11.4.1
CLI Configuration
Node
Command
Description
enable
show poe schedule port
PORT_ID
This command displays the PoE port schedule
configurations.
enable
configure terminal
This command changes the node to configure
node.
configure interface IFNAME
This command enters the interface configure
node.
interface poe schedule (disable|enable)
This command disables or enables the PoE
schedule on the specific port.
interface poe schedule week
(Sun|Mon|Tue|Wed|Thu|Fri|Sat)
check (yes|no)
This command enables or disables the PoE
schedule on the specific day.
interface poe schedule week
(Sun|Mon|Tue|Wed|Thu|Fri|Sat)
start-time VALUE end-time
VALUE action (enable|disable)
This command configures the PoE schedule
start-time and end-time on a specific day on the
specific port. Users can enable or disable the
PoE on the time period.
Summary of Contents for NGI-M08C4POE8-2
Page 1: ......
Page 197: ...197 Clear Clear the statistics of the valn ...
Page 298: ...298 9 2 2 Web Configurations ...