258
<IP> port PORTID
radius server.
configure dot1x radius secondary-server-ip
<IP> port PORTID key KEY
This command configures the secondary
radius server.
configure no dot1x radius secondary-server-ip This command removes the secondary
radius server.
configure dot1x username <USERNAME>
<PASSWORD>
This command configures the user account
for local authentication.
configure no dot1x username <STRING>
This command deletes the user account for
local authentication.
7.3.1.2
Web Configurations
Parameter
Description
Global Settings
State
Select
Enable
to permit 802.1x authentication on the Switch.
Note: You must first enable 802.1x authentication on the Switch before
configuring it on each port.
Authentication
Method
Select whether to use
Local
or
RADIUS
as the authentication method.
The
Local
method of authentication uses the “guest” and “user” user
groups of the user account database on the Switch itself to authenticate.
However, only a certain number of accounts can exist at one time.
RADIUS
is a security protocol used to authenticate users by means of
an external server instead of an internal device user database that is
limited to the memory capacity of the device. In essence, RADIUS
Summary of Contents for NGI-M08C4POE8-2
Page 1: ......
Page 197: ...197 Clear Clear the statistics of the valn ...
Page 298: ...298 9 2 2 Web Configurations ...
