4
Notes:
• The following instructions apply to the PCE-U2-PX4 when used with
a U.2 (4-lane PCIe) 2.5” NVMe SSD or HDD. The PCE-U2-PX4 can
be combined with a U.2 to NVMe/SATA M.2 adapter, such as
Tripp Lite’s P970-U2M2 (sold separately) to add support for M.2
modules.
• PCl Express cards are static-sensitive devices that require proper
handling. An Anti-Static ESD Wrist Strap (such as Tripp Lite’s
P999-000) or similar device should always be used when handling.
• Handle the card with care when installing. Hold it by the edges and
not the PCle interface connectors.
• When disconnecting the drive, go through the proper disconnection
steps of your operating system to safely remove it. Removing the
drive prior to proper disconnection can result in losing or corrupting
data stored on the drive.
• If your drive has not been formatted, you will first need to format it
using your computer’s disk management utility to copy and access
files.
RoHS
Installation
U.2 connector
SATA interface
PCIe×4 interface
