12A MAX.
12A MAX.
OUTPUT
TO UPS OUTPUT
UTILITY
UTILITY
UPS
UPS
AVAILABLE
MAINTENANCE BYPASS
AVAILABLE
CONNECT UPS
LINE CORD HERE
26
25
24
B
B
A
A
3
Step 2.
Install 4POSTRAILKIT into the rack using only the top mounting hole
A
at each
side of the rear of the 4POSTRAILKIT mounting shelves. (The screws at the front
of the shelves will not change from the standard procedure shown in your UPS or
4POSTRAILKIT manual.)
Step 3.
Install the PDU into the rack using the bottom two mounting holes
B
at each side
of the rear of the 4POSTRAILKIT mounting shelves.
Mounting
(continued)
Step 2
Step 3
Warning! Refer to the diagrams below to make sure the UPS system’s airflow is not obstructed. If the UPS system’s
airflow is obstructed, the UPS system will overheat.
