PDUB15
PDUB20
PDUB30
12A MAX.
12A MAX.
OUTPUT
12A MAX.
12A MAX.
OUTPUT
TO UPS OUTPUT
UTILITY
UTILITY
UPS
UPS
AVAILABLE
MAINTENANCE BYPASS
AVAILABLE
CONNECT UPS
LINE CORD HERE
15A MAX.
15A MAX.
OUTPUT
16A MAX.
16A MAX.
OUTPUT
TO UPS OUTPUT
UTILITY
UTILITY
UPS
UPS
AVAILABLE
MAINTENANCE BYPASS
AVAILABLE
CONNECT UPS
LINE CORD HERE
OUTPUT
24A MAX.
OUTPUT 20A MAX.
LOAD1
LOAD2
20A OUTPUT
BREAKERS
PUSH TO RESET
TO
UPS OUTPUT
UTILITY
30A
30A
UTILITY
UPS
UPS
AVAILABLE
MAINTENANCE BYPASS
AVAILABLE
CONNECT UPS
LINE CORD HERE
1
1
6
6
7
7
9
9
3
9
7
11
6
10
1
2
2
11
8
8
8
10
10
4
Features
1
5-15R AC Outlets:
Connect to 5-15P equipment plugs.
2
5-20R AC Outlets:
Connect to 5-15P or 5-20P equipment plugs.
3
L5-30R AC Outlets:
Connect to L5-30P equipment plugs.
4
C13 AC Outlets:
Connect to C14 equipment plugs.
5
C19 AC Outlets:
Connect to C20 equipment plugs.
6
UPS Source Input:
Connects to a compatible outlet on the UPS system.
7
Maintenance Bypass Switch:
Selects the power source that is powering the load – either the UPS source or the utility source. When
the switch is set to “Utility,” connected equipment receives AC utility power from the PDU, but the equipment will not receive UPS battery
backup power in the event of a utility power failure. See “Manual Bypass Operation” for more information.
8
Diagnostic Lights (UPS Available and Maintenance Bypass Available):
A green “UPS Available” light will illuminate when the UPS
source is connected and turned on. A yellow “Maintenance Bypass Available” light will illuminate when the utility source is connected and
turned on.
9
Utility Source Input:
Connects to the utility power source. Models PDUB15, PDUB20 and PDUB30 each have a fixed input cord and
plug. Model PDUBHV10 has a C14 inlet and model PDUBHV20 has a C20 inlet. Models PDUBHV10 and PDUBHV20 both include an
extension jumper and can also be used with a user-supplied power cord. (See below for a selection of compatible Tripp Lite power cords.)
10
UPS Connection Outlet:
Connects to the UPS system’s input power cord. The user must match the UPS system’s input power cord to a
compatible PDU model.
11
20-Amp Branch-Rated AC Output Breakers (PDUB30 Only):
Control power to the PDU’s outlets.
