background image

2

 Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that should be followed 

during the installation, operation and storage of this product. Failure to 

heed these instructions and warnings will void the product warranty.

 Important Warnings

•  The PDU provides the convenience of multiple outlets, but DOES NOT provide surge or line noise 

protection for connected equipment.

•  The PDU is designed for indoor use only, in a controlled environment, away from excess 

moisture, temperature extremes, conductive contaminants, dust or direct sunlight.

•  Keep indoor ambient temperature between 32°F and 104°F (0°C and 40°C). 
•  The PDU must be installed by a qualified technician only.
•  Do not attempt to mount the PDU to an insecure or unstable surface.
•  Install in accordance with National Electrical Code standards. Be sure to use the proper 

overcurrent protection for the installation, in accordance with the plug/equipment rating.

•  Connect the PDU to an outlet that is in accordance with your local building codes and that is 

adequately protected against excess currents, short circuits and earth faults.

•  The electrical outlets supplying power to the equipment should be installed near the equipment 

and easily accessible.

•  Do not connect the PDU to an ungrounded outlet or to extension cords or adapters that 

eliminate the connection to ground.

•  Be sure to provide a local disconnect device on any models that are permanently installed 

without a plug that is easily accessible.

•  Never attempt to install electrical equipment during a thunderstorm.
•  Individual equipment connected to the PDU should not draw more current than the individual 

PDU’s outlet’s rating.

•  The total load connected to the PDU must not exceed the maximum load rating for the PDU.
•  Do not attempt to modify the PDU, input plugs or power cables.
•  Do not drill into or attempt to open any part of the PDU housing. There are no user-serviceable 

parts inside.

•  Do not attempt to use the PDU if any part of it becomes damaged.
•  Use of this equipment in life support applications where failure of this equipment can reasonably 

be expected to cause the failure of the life support equipment or to significantly affect its safety 
or effectiveness is not recommended. Do not use this equipment in the presence of a 

flammable anesthetic mixture with air, oxygen or nitrous oxide.

14-09-039-9333BC.indb   2

9/29/2014   12:33:52 PM

Summary of Contents for PDUH30HV













Reviews: