Features
208/230/240V 20A maximum capacity (agency de-rated to 16 amps) Switched, Metered and Monitored Power Distribution Unit (PDU) with
built-in web/network interface in 1U rackmount form factor
Includes L6-20P and C19 line cord options and 8 C13 controllable outlets
Supports individually controllable output receptacles, current metering, network monitoring and remote control via built-in web/network
monitoring and control card
Offers the ability to turn on, turn off, recycle or lock-out power to each individual PDU receptacle on a programmable or real-time basis
Switchable outlets enable a number of advanced networking abilities, such as remote reboot on-demand of locked IT equipment, custom
power-on/power-off outlet sequencing, automatic load-shedding of optional loads during power failures and disabling unused outlets to
prevent the connection of unauthorized equipment loads
Remote interface provides data regarding input power conditions, load level and individual outlet power status via secure network or web
browser interface
Supports notification and logging of all major power events and user specified alarm thresholds
Optional ENVIROSENSE temperature and humidity probe enables remote monitoring of environmental conditions and the ability to report
conditions from up to two contact-closure sensors
Optional ENVIROSENSE accessory also supports the connection of up to three user supplied contact-closure sensors to selectively notify,
monitor and log reported conditions, such as rack door access
DHCP/Manual configuration support provides the ability to have network settings automatically assigned to the card, or manually assigned
via permanent IP addresses
10/100 Mbps auto-sensing allows optimal communication compatibility with your current 10/100 Base-T network
Real-time clock support maintains the time of day and date even if the PDU is shut down and unpowered
2-tier level access allows an administrator and a guest to log into the web browser for monitoring and/or management of all intelligent PDUs
and similarly equipped UPS systems
Alert notifications via email or SNMP traps give users the added advantage of having an immediate event notification
Protocols supported include HTTP, HTTPS, PowerAlert Network Management System, SMTP, SNMPv1, SNMPv2, Telnet, FTP, DHCP,
BOOTP, NTP
Front panel ammeter with displays whole PDU power consumption
On initial power-up, outlets are automatically energized at 250 millisecond intervals to prevent inrush-related equipment interaction and
mains circuit overloads
Included cord retention brackets keep vital network equipment plugged in and continuously powered
1U rackmount installation supported in 2 or 4 post racks
Circuit breaker free format prevents power interruptions due to tripped breakers while still providing mains panel protection from overloads
and short circuit fault conditions
Specifications
SYSTEM OVERVIEW
Voltage compatibility
208/240, 230V
Frequency
compatibility
50/60 Hz
OUTPUT
Output nominal voltage
208/240, 230V
Outlet quantity / type
8 C13 outlets
Customized load
management
receptacles
Each outlet is individually controllable via remote interface
Overload protection
Outlets are arranged in a single unbreakered load bank
INPUT
Maximum input amps
20A maximum (Agency de-rated to 16A continuous)
Input connection type
Detachable line cord via C20 inlet. L6-20P and C19 line cord options included
Input cord length
8.5 ft / 2.6m
Recommended
Electrical Service
208/240, 230V
LEDS ALARMS & SWITCHES
