background image

Storage and Service

Storage

To avoid battery drain, all connected equipment should be turned off and disconnected from 

the UPS. Press and hold the

 

MODE

 

button for 2.5 seconds. Your UPS will be completely turned 

off (deactivated), and will be ready for storage. If you plan on storing your UPS for an 
extended period, fully recharge the UPS batteries every three months. Plug the UPS into a 

live AC outlet, turn it on by pressing and holding the

 

MODE

 

button for 2 seconds, and allow the 

batteries to recharge for 4 to 6 hours. If you leave your UPS batteries discharged for a long 

period of time, they will suffer a permanent loss of capacity.

Service

A variety of Extended Warranty and On-Site Service Programs are available from Tripp Lite. 

For more information on service, visit www.tripplite.com/support. Before returning your 

product for service, follow these steps:
1.  Review the installation and operation procedures in this manual to insure that the service 

problem does not originate from a misreading of the instructions.

2.  If the problem continues, do not contact or return the product to the dealer. Instead, visit 

www.tripplite.com/support.

3.  If the problem requires service, visit www.tripplite.com/support and click the Product 

Returns link. From here you can request a Returned Material Authorization (RMA) number, 

which is required for service. This simple on-line form will ask for your unit’s model and 
serial numbers, along with other general purchaser information. The RMA number, along 

with shipping instructions will be emailed to you. Any damages (direct, indirect, special or 

consequential) to the product incurred during shipment to Tripp Lite or an authorized Tripp 

Lite service center is not covered under warranty. Products shipped to Tripp Lite or an 

authorized Tripp Lite service center must have transportation charges prepaid. Mark the 
RMA number on the outside of the package. If the product is within its warranty period, 

enclose a copy of your sales receipt. Return the product for service using an insured 

carrier to the address given to you when you request the RMA.

Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered into 
a drawing for a chance to win a FREE Tripp Lite product! *

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

FCC Part 68 Notice (United States Only)

If your Modem/Fax Protection causes harm to the telephone network, the telephone company may temporarily 

discontinue your service. If possible, they will notify you in advance. If advance notice isn’t practical, you will be 
notified as soon as possible. You will be advised of your right to file a complaint with the FCC. Your telephone 
company may make changes in its facilities, equipment, operations or procedures that could affect the proper 
operation of your equipment. If it does, you will be given advance notice to give you an opportunity to maintain 
uninterrupted service. If you experience trouble with this equipment’s Modem/Fax Protection, please visit www.

tripplite.com/support for repair/warranty information. The telephone company may ask you to disconnect this 
equipment from the network until the problem has been corrected or you are sure the equipment is not 
malfunctioning. There are no repairs that can be made by the customer to the Modem/Fax Protection. This 
equipment may not be used on coin service provided by the telephone company. Connection to party lines is 

subject to state tariffs. (Contact your state public utility commission or corporation commission for information.) 

Product Registration

11

17-02-143-9336B5.indb   11

3/14/2017   2:04:00 PM

Summary of Contents for SMART1200LCD













Reviews: