DC system voltage
(VDC)
24
Battery recharge rate
(included batteries)
Less than 8 hours from 10% to 90%
Replacement battery
cartridge (internal UPS
battery replacement)
RBC51
(requires 2)
VOLTAGE REGULATION
Voltage regulation
description
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 92 to 150
Overvoltage correction
Input voltages between 129 and 147 are reduced by 15%
Undervoltage
correction
Input voltages between 92 and 108 are boosted by 18%
LEDS ALARMS & SWITCHES
Front panel LCD
display
LCD screen with scroll buttons indicates Input voltage, Output voltage, Frequency (Hz), AVR boost / cut status,
Output load in watts, Output load percentage, Output load in watts, Battery voltage and Estimated runtime in
minutes
Alarms
Audible alarm indicates power-failure and low-battery conditions
Alarm cancel operation
Power-fail alarm can be silenced using alarm-cancel switch
Switches
Power switch offers whole UPS power control; Scroll/mute button enables LCD selection options and silences
audible alarm; Test button initiates self test
SURGE / NOISE SUPPRESSION
UPS AC suppression
joule rating
650
UPS AC suppression
response time
Instantaneous
UPS Dataline
suppression
1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet; Coax jacks (1 set)
EMI / RFI AC noise
suppression
Yes
PHYSICAL
Installation form
factors supported with
included accessories
Tower
Primary form factor
Tower
UPS / Power Module
dimensions in primary
form factor (height x
width x depth / inches)
8 x 5.75 x 15.4
UPS / Power Module
dimensions in primary
form factor (height x
width x depth / cm)
20.3 x 14.6 x 39.1
UPS / Power Module
weight (lbs)
27
UPS / Power Module
weight (kg)
12.3
