1
5
9
3
7
11
2
6
10
4
8
12
13
14
3
4
5
48
10 – Display and Configuration
(continued)
LCD Contrast
Use “ ” or ” ” to set the contrast of LCD screen, then press
”
” to confirm. Changes the contrast ratio of the LCD.
(This item is user accessible!)
1 is the lowest and 5 is the highest level.
10-5-7 Local Setup
(continued)
Date Format
Use “ ” or ” ” to change the date format, then press ”
” to
confirm.
(This item is user accessible! )
From the “SERIAL COM ID” screen, use the scroll buttons (
,
) to select the desired serial port ID and press the enter button
(
) to confirm the setting.
Note: This setting does not apply to
standard RS-232 connections. It only applies for RS-485/RS-422
communications.
3
4
5
This ID is not used for standard RS232 connection. If using the RS485/RS422
converter of other brands to connect to RS232 port, the ID can be set to 00, 01…….99.
12-212-93-3141.indb 48
12/28/2012 11:18:12 AM
