PRESS TO ADVANCE
PRESS TO ADVANCE
PRESS TO ADVANCE
PRESS TO ADVANCE
PRESS TO ADVANCE
PRESS TO ADVANCE
PRESS TO ADVANCE
PRESS TO ADVANCE
PRESS TO ADVANCE
15
Operation
The LOAD data screen specifies the amount of power that
connected equipment is currently using in terms of percentage and
kW / kilowatts (1kW = 1000 watts / 0.5kW = 500 watts, etc.).
4th screen
The DEMAND ENERGY screen offers continuous data on the KWh
(kilowatt-hours) that connected equipment has consumed in the
last one-hour period.
5th screen
The REMAIN WATTS screen tracks the remaining capacity of the
UPS in kilowatts. (1kW = 1000 watts / 0.5kW = 500 watts, etc.).
6th screen
The RUNTIME remaining screen tracks the approximate minutes
of runtime available under the current loading and battery pack
configuration. The runtime value will automatically re-calculate as
connected equipment power consumption changes.
7th screen
The BATTERY voltage screen tracks the charge level of your
connected battery bank in terms of voltage and charge percentage.
8th screen
The OUTPUT VOLTAGE & FREQUENCY screen displays current data.
9th screen
The INPUT VOLTAGE & FREQUENCY screen displays current data.
* Set of 9 information screens are shown in ON LINE MODE, but can also be viewed from all 6 operating modes.
LCD Status & Supported Measurements
1st screen
2nd Screen
The OUTPUT LOAD LEVEL screen indicates the load percentage and
kVA output load level.
3rd Screen
The OUTPUT LOAD POWER FACTOR screen indicates the power
factor of connected equipment.
13-07-015-9332C3.indb 15
7/26/2013 11:16:21 AM
