includes 3 internal battery packs and accepts 1 additional internal battery pack. A standalone battery module compartment with a 4 battery
pack capacity and daisy-chain capability (model # SUBF2030) is available to further extend runtime.
3 communication ports (RS-232, contact closure and AS-400)
Slot for optional SNMP card (model # SNMPWEBCARD)
Manual bypass switch as well as an automatic bypass function ensures 100% availability of connected equipment by safely passing
through AC power when the UPS system requires maintenance
Battery Start Switch allows cold restart of UPS during a prolonged blackout to utilize its batteries for periodic system access or data retrieval
Emergency Power Off button turns UPS output OFF and disables Bypass output
PowerAlert Universal UPS Power Management Software and 6 ft. communication cable included
Start-up service program is recommended to enhance the reliability of the installation
Built-in Emergency Power Off (EPO) interface supports remote emergency shutdown in large facilities
Combination LED/LCD display
Specifications
OUTPUT
Output Volt Amp
Capacity (VA)
30000
Output kVA capacity
(kVA)
30
Output Watt Capacity
(watts)
24000
Output kW capacity
24
Output power factor
0.8
Crest Factor
3:1
Nominal Output
Voltage(s) Supported
120/208V; 3-Phase Wye
Frequency
compatibility
50 / 60 Hz
Output voltage
regulation (line mode)
+/- 2%
Output voltage
regulation (Battery
mode)
+/- 2%
Built-in UPS output
receptacles
Hardwire
Output AC waveform
(AC mode)
Sine wave
Output AC waveform
(battery mode)
Pure Sine wave
INPUT
Rated input current
(at maximum load)
90A (per phase, online)
Nominal Input
Voltage(s) Supported
120V / 208V 3 phase wye
UPS input connection
type
Hardwire
UPS input connection
description
120/208V (3-Phase, 4 Wire, wye)
BATTERY
