36
1
5
9
3
7
11
2
6
10
4
8
12
13
14
10 – Display and Confi guration
(continued)
10-7 UPS System Setup Menu
Press the enter button (
•
) to select “UPS SETUP” from the main
menu.
Accessing the UPS system setup menu requires a password. From
•
the login screen, press the enter button (
) to select whether
to log in as an administrator or a user. Administrators can view
and change all UPS system parameters; regular users can view
all parameters, but can only change a few basic parameters. Only
qualified service personnel should log in as the administrator.
The password consists of 4 numerals. Press the scroll down button
•
(
) or the scroll up button (
) to select the first numeral, then
press the enter button (
) to enter the numeral choice. After
entering the last numeral, press the enter button (
) to confirm
the password choice. The default user password is 0000. The
default administrator password is 0000. Only qualified service
personnel should have access to the administrator password. See
Section 10-11
for instructions on changing the passwords.
After the correct password has been entered, the LCD screen will
•
show the UPS system setup menu.
10-8 Bypass Setup Menu
Enter the UPS system setup menu as described in
•
Section 10-7
.
Use the scroll buttons (
,
) to move the cursor to “BYPASS
SETUP”, then press the enter button (
).
Use the scroll buttons (
•
,
) and the enter button (
) to select
“VOLTAGE RANGE” or “FREQUENCY RANGE”.
1
1
2
2
3
4
1
2
3
1
4
2
