40
1
5
9
3
7
11
2
6
10
4
8
12
13
14
10 – Display and Confi guration
(continued)
10-11 Local Setup Menu
Enter the UPS system setup menu as described in
•
Section 10-7
.
Use the scroll buttons (
,
) to move the cursor to “LOCAL
SETUP”, then press the enter button (
).
Use the scroll buttons (
•
,
) and the enter button (
) to select
one of the menu choices.
From the “DATE/TIME CHANGE” screen, use the scroll buttons
•
(
,
) to select the desired settings and press the enter button
(
) to confirm the settings.
Note: Changing this setting does not
require an administrator login – a user login is sufficient.
From the “PASSWORD CHANGE” screen, use the scroll buttons
•
(
,
) and the enter button (
) to select the desired menu
choice. Use the scroll buttons (
,
) to select the desired settings
and press the enter button (
) to confirm the settings.
Note:
The administrator password should be used by qualified service
personnel only.
From the “PARALLEL ID” screen, use the scroll buttons (
•
,
)
to select the desired settings and press the enter button (
)
to confirm the settings.
Note: If two UPS systems are used in a
parallel redundancy configuration, the parallel ID numbers of the
UPS systems must be 1 and 2.
1
2
3
4
5
1
3
4b
2
4
5
