3
Mounting
Rackmount
Position brackets as shown in Figure 1
to serve as mounting ears for the UPS
in your rack. Use 4 mounting screws
and washers to connect the UPS to
each bracket. Mount the UPS in your
rack with user-supplied screws and hardware appropriate to your rack. Have an
assistant hold the UPS in position while mounting.
Desktop/Under-Monitor
Place on your desktop or under your computer monitor with the control and LED
panel forward.
CAUTION:
Do not place more than 50 lb. (22.7 kg) on your UPS.
Vertical Tower
Position brackets as shown in Figure 2 to serve as stabilizers for the UPS in a
vertical position. Use 2 flattop mounting screws to connect the UPS to each
bracket. Make sure the control and LED panel is at the top. To prevent dust from
settling inside the UPS, fill the empty upward-facing holes with the plastic
plugs included.
Wallmount
To mount the UPS perpendicular to a wall along a straight, vertical line, first
position brackets on the UPS's sides as shown in Figure 3. Adjust brackets to
desired distance from wall. Use 4 mounting screws and washers to connect the
UPS to each bracket. Mount UPS to your wall with user-supplied screws and
hardware appropriate to the composition of the wall. Have an assistant hold the
UPS in position while mounting. Make sure the control and LED panel is at the
top. Additional bracket holes allow you to mount up to two UPSs side-by-side
on the same set of brackets (Figure 4).
CAUTION:
each UPS weighs 15-1/2 lbs.
(7 kg). Be sure that user-supplied mounting hardware can support this weight.
Installation
Figure 2 – Vertical Tower
Figure 3 – Wallmounting One UPS
Figure 4 – Wallmounting
Two UPSs
Figure 1 – Rackmount
200007222 Smart 450 RT Owners Manual [120 Volt].p65
9/7/00, 5:16 PM
3
