5
Mounting (Rack)
Connect the two segments of each shelf
A
using the included screws and nuts
B
. Leave
the screws slightly loose so that the shelves can
be adjusted in the next step.
Adjust each shelf to fit your rack, then mount
them in the lowest available space of your rack
with the screws, nuts and washers provided
C
.
Note that the support ledges should face
inward. Tighten the screws that connect the
shelf segments
B
.
Attach the mounting ears
D
to the front
mounting holes of your equipment
E
using the
screws provided
F
. The ears should face
forward.
Using an assistant, lift your equipment and
slide it onto the mounting shelves. Attach your
equipment to the rack by inserting the
appropriate hardware
G
through the mounting
ears and into the rack rails.
1
2
3
A
B
C
B
E
D
F
G
1
2
3
4
4
4-Post Mounting
(Included with 2U and 3U models. Optional for 4U models.)
If you want to mount a 4U model UPS in a 4-post rack, a Tripp Lite 4-Post Rack-mount
Installation Kit (model: 4POSTRAILKIT, sold separately) will be required.
19-01-060-932757.indb 5
1/21/2019 9:56:36 AM
