Emergency Power Off (EPO) interface with cable
Multi-function audible alarms and set of 5 front panel LEDs
C14 inlet accepts user-supplied AC power cord with country specific plug
Network-grade AC surge suppression
Field-replaceable, hot-swappable internal UPS batteries
Specifications
OUTPUT
Output Volt Amp Capacity
(VA)
500
Output Watt Capacity
(watts)
300
Output power factor
0.6
Nominal Output Voltage(s)
Supported
220V; 230V; 240V
Nominal Voltage details
230v nominal inverter output voltage
Frequency compatibility
50 / 60 Hz
Output voltage regulation
(line mode)
-8%, +15%
Output voltage regulation
(Battery mode)
+/- 5%
Built-in UPS output
receptacles
6 C13 outlet(s)
Included output power
cables
Two 1.8m IEC320-C13 to C14 load jumper cables
Surge suppression only
outlets
6 UPS outlets, 1 surge-only outlets
Built-in controllable
switched load banks
One switchable single-outlet C13 load bank
Output AC waveform (AC
mode)
Sine wave
Output AC waveform
(battery mode)
PWM sine wave
INPUT
Rated input current (at
maximum load)
2.4A
Nominal Input Voltage(s)
Supported
230V AC
UPS input connection type
C14 inlet
UPS input connection
description
C14 inlet accepts user-supplied AC power cord with country-specific plug
Input circuit breaker
8A
BATTERY
Full load runtime (minutes)
3.2 min. (300w)
Half load runtime
(minutes)
14.6 min. (150w)
