5
Plug your UPS’s line cord into an
electrical outlet.
Your UPS must be connected directly to a 3-
wire grounded AC receptacle. Do not use
extension cords with your UPS.
Once your UPS is plugged in, the UPS will
enter STANDBY mode. The fan will activate
and the “
” LED will begin flashing. The
UPS system’s outlets will not be active until
the UPS is turned ON.
Plug your equipment into your UPS.
Your UPS is designed to support only computer
equipment. You will overload your UPS if you
connect household appliances, laser printers
or surge suppressors to the UPS’s outlets.
Turn your UPS ON
• Press the “POWER” button
• Hold the button for a moment, until the
“
” LED stops flashing and illuminates
constantly
• Release the button
Your UPS is now ON and its AC outlets
are active.
Connection
1
3
2
SM2000RMX plug (NEMA L5-20P) shown
SM1000RMX shown
SM2000RMX shown
1
2
3
200208099 93-2040 SM1000RMX Owner’s Manual.qxd 9/12/2002 3:53 PM Page 5
