Front panel LCD monitoring screen with MODE and ENTER buttons reports operating mode with 5-bar battery charge graphic, plus 7 selectable screens
of detailed UPS and site power information
LCD interface also supports a number of advanced user setup and operating preferences
Ships with 4 post rackmount installation hardware; Optional 2POSTRMKITWM enables 2 post rackmount/wallmount installation; Optional 2-9USTAND
enables tower placement
Built-in USB, RS-232 and optional SNMPWEBCARD accessory monitoring options
HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X
Included PowerAlert UPS monitoring software; Built-in Emergency Power Off (EPO) interface with cable
Specifications
OUTPUT
Output Volt Amp Capacity (VA)
2600
Output kVA capacity (kVA)
2.6
Output Watt Capacity (watts)
1920
Output kW capacity
1.92
Nominal Output Voltage(s)
Supported
120V
Frequency compatibility
60 Hz
Output voltage regulation (line mode)
-14%, +6%
Output voltage regulation (Battery
mode)
+/- 5%
Built-in UPS output receptacles
4 5-15R outlet(s); 4 5-15/20R outlet(s); 1 L5-20R outlet(s)
Built-in controllable switched load
banks
Two switchable single-outlet 5-15R load banks
Output circuit breaker
15A breaker protects 5-15R, 20A breaker protects 5-15/20R, L5-20R is unbreakered
Output AC waveform (AC mode)
Sine wave
Output AC waveform (battery mode)
Pure Sine wave
INPUT
Rated input current (at maximum
load)
16A
Nominal Input Voltage(s) Supported
120V AC
UPS input connection type
5-20P
UPS Input cord length (ft.)
10
UPS Input cord length (m)
3
Recommended Electrical Service
20A 120V
Phase
Single-Phase
2 / 6
