UPS Input cord length (ft.)
10
UPS Input cord length (m)
3
Recommended Electrical Service
30A 120V
Phase
Single-Phase
BATTERY
Full load runtime (minutes)
3 min. (2880w)
Half load runtime (minutes)
10 min. (1440w)
Expandable battery runtime
Extended runtime supported via optional external battery packs
External battery pack compatibility
BP48V24-2U
(limit 1);
BP48V60RT-3U
(multi-pack compatible);
BP48V27-2US
(multi-pack compatible)
DC system voltage (VDC)
48
Battery recharge rate (included
batteries)
Less than 5 hours from 10 to 90%
Replacement battery cartridge
(internal UPS battery replacement)
RBC58-2U
Battery Access
Front panel battery access door
Battery replacement description
Hot-swappable, replaceable batteries
VOLTAGE REGULATION
Voltage regulation description
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145
Overvoltage correction
Input voltages between 127 and 145 are reduced by 12%
Undervoltage correction
Input voltages between 108 and 96 are boosted by 12%
Severe undervoltage correction
Input voltages between 83 and 95 are boosted by 24%
LEDS ALARMS & SWITCHES
Front panel LCD display
Front panel LCD information and configuration screen offers detailed UPS and site power status and operating
data, plus configuration of voltage, operating mode, alarm function and a variety of additional options (see manual
for detailed LCD configuration and monitoring options)
Alarms
Audible alarm indicates UPS startup, power-failure, low-battery, overload, UPS fault and remote shutdown conditions
Alarm cancel operation
Power-fail alarm can be temporarily silenced using alarm-cancel switch; silent mode alarm configuration option
available
Switches
3 pushbutton switches control OFF / ON power status, MODE selection and MUTE / ENTER control functions
SURGE / NOISE SUPPRESSION
UPS AC suppression joule rating
570
EMI / RFI AC noise suppression
Yes
AC suppression response time
Instantaneous
PHYSICAL
3 / 6
