Full load runtime
(minutes)
16 min. (4000w)
Half load runtime
(minutes)
38 min. (2000w)
Expandable battery
runtime
Extended runtime supported via optional external battery packs
External battery pack
compatibility
BP48V60RT-3U
(multi-pack compatible)
DC system voltage (VDC)
48
Battery recharge rate
(included batteries)
Less than 4 hours from 10% to 90%
Battery replacement
description
Hot-swappable, user replaceable batteries
VOLTAGE REGULATION
Voltage regulation
description
Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 151 to 282
Overvoltage correction
Input voltages between 240V and 282 are reduced by 12%
Undervoltage correction
Input voltages between 180V and 199 are boosted by 12%
Severe undervoltage
correction
Input voltages between 151V and 179 are boosted by 24%
LEDS ALARMS & SWITCHES
LED Indicators
5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
Alarms
Audible alarm indicates power-failure, overload and low-battery conditions
Alarm cancel operation
Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate
low-battery status
Switches
2 Switches control off/on power status and alarm-cancel/self-test operation
SURGE / NOISE SUPPRESSION
UPS AC suppression
joule rating
1020
UPS AC suppression
response time
Instantaneous
EMI / RFI AC noise
suppression
Yes
AC suppression joule
rating
1020
AC suppression
response time
Instantaneous
PHYSICAL
Installation form factors
supported with included
accessories
4 post 19 inch rackmount (mounting rail kit included)
Installation form factors
supported with optional
accessories
2 post rackmount (2POSTRMKITHD); Tower (2-9USTAND)
Optional mounting
accessory notes
2 sets of
2POSTRMKITHD
required for 2 post rackmount installation of separate power module and battery pack
