11
Automatic Voltage Regulation Icon:
Indicates that the AC input is either low or
high and that the AVR function is actively boosting or cutting the line. The AVR
icon is also used in conjunction with the EVENTS icon to indicate AVR events.
BATTERY CAPACITY Icon:
Used to better describe the battery capacity bar graph.
Basic Operation
continued
Display Power Conditions
Use the
button to advance through power conditions.
1. Voltage In
2. Voltage Out
3. Estimated Runtime
(in minutes)
4. Load %
5. Load Wattage*
6. KWH/Day**
7. Battery Capacity %
* Load Wattage is displayed in watts up to “999” and then will be displayed in Kilowatts.
** The Kilowatt Hour usage per day reports daily power consumption of equipment connected to the UPS in KWH
in a 24-hour cycle. Press and hold the button for 4 seconds to reset the accumulator to “0.”
Note:
When the UPS is in Battery Mode (power is supplied to the output from the batteries), the BATTERY icon will be
lit in the display instead of the AC INPUT icon. The values displayed are random values used for example reference.
14-08-107-93-33B2.indb 11
9/25/2014 12:29:38 PM
