background image

8

Warranty and Product Registration

1-YEAR LIMITED WARRANTY

TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one 

(1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing 

or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must 
obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service 

center. Products must be returned to TRIPP LITE or an authorized TRIPP LITE service center with transportation 
charges prepaid and must be accompanied by a brief description of the problem encountered and proof of 

date and place of purchase. This warranty does not apply to equipment, which has been damaged by accident, 

negligence or misapplication or has been altered or modified in any way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING 

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or 

exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, 

INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED 

OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as lost profits 

or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, 
claims by third parties, or otherwise.

PRODUCT REGISTRATION

Visit www.tripplite.com/warranty today to register your new Tripp Lite product. You’ll be automatically entered 

into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, 

when customers buy new electrical and electronic equipment from Tripp Lite they are entitled to:
• Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending on the 

country)

• Send the new equipment back for recycling when this ultimately becomes waste

Use of this equipment in life support applications where failure of this equipment can reasonably be expected 
to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not 
recommended. Do not use this equipment in the presence of a flammable anesthetic mixture with air, oxygen 

or nitrous oxide.

Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

15-11-089 • 93-34DC_revA

15-11-089-9334DC-EN.indd   8

11/20/2015   2:11:11 PM

Summary of Contents for T020-001-PSF









Reviews: