background image

6

Warranty & Warranty Registration

1-Year Limited Warranty

TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period of one 
(1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is limited to repairing 

or replacing (at its sole option) any such defective products. To obtain service under this warranty, you must 
obtain a Returned Material Authorization (RMA) number from TRIPP LITE or an authorized TRIPP LITE service 

center. Products must be returned to TRIPP LITE or an authorized TRIPP LITE service center with transportation 

charges prepaid and must be accompanied by a brief description of the problem encountered and proof of 
date and place of purchase. This warranty does not apply to equipment, which has been damaged by accident, 
negligence or misapplication or has been altered or modified in any way.

EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid limitation(s) or 

exclusion(s) may not apply to the purchaser.

EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, 
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT, EVEN IF ADVISED 
OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable for any costs, such as lost profits 

or revenue, loss of equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, 
claims by third parties, or otherwise.

Use of this equipment in life support applications where failure of this equipment can reasonably be expected 

to cause the failure of the life support equipment or to significantly affect its safety or effectiveness is not 
recommended. Do not use this equipment in the presence of a flammable anesthetic mixture with air, oxygen 

or nitrous oxide.

WARRANTY REGISTRATION

Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You’ll be 
automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

Tripp Lite follows a policy of continuous improvement. Product specifications are subject to change without 
notice.

FCC Notice, Class B

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) 
This device may not cause harmful interference, and (2) this device must accept any interference received, 
including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant 

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy 
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not occur in a particular installation. If 
this equipment does cause harmful interference to radio or television reception, which can be determined by 
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of 
the following measures:
•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dealer or an experienced radio/TV technician for help.

Any changes or modifications to this equipment not expressly approved by Tripp Lite could void the user’s 
authority to operate this equipment.

WEEE Compliance Information for Tripp Lite Customers and Recyclers (European Union)

Under the Waste Electrical and Electronic Equipment (WEEE) Directive and implementing regulations, 
when customers buy new electrical and electronic equipment from Tripp Lite they are entitled to:
•  Send old equipment for recycling on a one-for-one, like-for-like basis (this varies depending  

on the country)

•  Send the new equipment back for recycling when this ultimately becomes waste

13-10-121-9332DF.indd   6

10/25/2013   2:43:04 PM

Summary of Contents for U357-002









Reviews: