2
Product Features
Package Contents
System Requirements
• U357-025-UASP
• 1-ft. USB 3.0 Micro-B Cable
• Owner’s Manual
Optional Accessories
• U324-Series USB 3.0 A/A Extension
Cables
• U326-Series USB 3.0 Micro-B Cables
• Computer with an available USB port (USB 3.0 is required to achieve USB 3.0
data transfer rates)
• UASP-enabled host controller required to achieve UASP performance
• 2.5” SATA Hard Drive (HDD) or Solid State Drive (SSD); 9.5 mm max height
• Most hard drives will operate on the 5V, 900mA provided by the USB 3.0 port. If
your hard drive requires additional power, use a 5V, 2A power supply with a 3.5 x
1.35 mm output plug with a positive tip and negative sleeve.
• Supports 2.5” SATA hard drives (HDD) and solid state drives (SSD)
• Features UASP (USB Attached SCSI Protocol), which allows your hard drive to
perform significantly faster when connected to a UASP-enabled host controller
• SuperSpeed (5 Gbps) / Hi-Speed (480 Mbps) / Full-Speed (12 Mbps) compliant
• SATA III (6 Gbps) / SATA Gen2i (3 Gbps) / SATA Gen1i (1.5 Gbps) compliant
• Supports SATA hard drives up to 3 TB; will support higher capacity drives when
available
• Features hibernation mode, in which the unit goes to sleep after 30 minutes of
inactivity and wakes up when activity resumes (Activity LED will blink every
3 seconds in hibernation mode)
• No power supply required*
• Plug-and-play; no software or drivers required
* Most hard drives will operate on the 5V, 900mA provided by the USB 3.0 port. If your hard drive
requires additional power, use a 5V, 2A power supply with a 3.5 x 1.35 mm output plug with a
positive tip and negative sleeve.
15-06-304-93348E.indd 2
6/26/2015 4:58:48 PM
