19
Copyright © 2016 TripSpark Technologies, its subsidiaries and affiliates. All rights reserved.
A
DD
-A-C
IRCUIT
I
NSTALLATION
VSS (VEHICLE SPEED SENSOR FOR ODOMETER PULSES) OPTIONAL
o
Most installations will utilize the Ranger GPS receiver for mileage tracking, however in
some cases a wired odometer connection may be required. Many vehicles have a VSS
point which provides a pulse train from the transmission. Vehicles that do not have a
VSS point with adequate signal characteristics will require the installation of a
transducer. It is the responsibility of the installer and customer to locate a VSS point or
determine the appropriate location for a transducer. Your TripSpark representative may
be able to assist in locating suitable VSS point. They can also provide information on the
type of signal that is required for accurate odometer tracking.
Emergency Switch (optional)
The emergency switch is usually installed somewhere that would allow for covert operation. This
location needs to be chosen by the customer prior to the start of installation. TripSpark will provide a
switch if one is required. It is sometimes possible to use an existing switch already on the vehicle. A
TripSpark Vehicle Specialist will provide details for your specific requirements.
A
DD
-A-C
IRCUIT
I
NSTALLATION
