background image

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Warranty Cover

TriTechAirless

This warranty applies only to TriTech airless sprayers that have been purchased 
through an approved dealer of Aristospray UK (the exclusive importer of all 
products manufactured by TriTech Industries Incorporated into the UK and 
Ireland) for use in the United Kingdom, Northern Ireland, the Isle of Man, the 
Channel Islands including Alderney, Guernsey and Jersey and the Republic of 
Ireland only. Such TriTech airless sprayers must be for the purchaser’s own use, 
not for hire purposes. Any TriTech airless sprayers not supplied by an approved 
dealer or for use in regions other than those listed are expressly excluded from 
this warranty.

Motor & Drivetrain Lifetime Warranty

The motor, motor brushes and drive train are warranted to the original purchaser 
only under normal use and service against defects in craftsmanship or material 
for the lifetime of the product.

Wearing Parts Two Year Warranty

Should the packings, piston or prime valve need replacing within two years of 
the original purchase this will be carried out by an approved service agent at 
no cost to the purchaser; this is limited to a one-time change only within the 
warranty period.

Craftsmanship Four Year Warranty

Outside of what is listed in the ‘Motor & Drivetrain Lifetime Warranty’ and the 
‘Wearing Parts Two Year Warranty’ TriTech airless sprayers are warranted under 
normal use and service against manufacturing defects for four years from 
the date of original purchase. This includes the frame, the controller box and 
associated componentry and all other parts not specifically listed. Tyre failure 
due to puncture (where applicable) is excluded.

Summary of Contents for 200-517













Reviews: