5
Ensure, that
all snap buttons face inside
the kayak:
The bow element is fully assembled and
should result in the image on the left.
3) Assembling stern
You need:
1x Stern element with two long fixed rods
1x Keel fork
(both identical)
4x Stringer element without lock
4x Stringer element with lock
1x Cross rib #4 with two clips on top
Proceed likewise as with the bow element:
Attach a stringer element without lock to
each of the 4 pickups of the bow element.
Then attach one stringer element with lock
to each of them.
Mount the keel fork on the keel rod of the
stern element. Again, make sure, the clips
of the keel show upwards.
Insert cross rib #4 into the receiver on the
keel and clip all the stringer into the C-
clips. The two fixed rods of the stern
element have to be clipped into the to
clips on top of the cross rib. Make sure,
that they overlap equally
(as shown on
the left)
.
snap button
